Programing dip switches in 202U-V6

[Claichebob]

I have a 202U-V6. How do you set 4 position dip switch for momentary with both relay 1 and relay 2 ?
I cant get to get relay 2 to operate in the momentary mode.

[william]

When all dip switches in OFF position (default), both relays should be in momentary mode.
Manual can be found below.

SR-RCS-202U receiver manual

We have uploaded 202U receiver’s manual, you can find it at link below Manual for V6 version: https://docdro.id/zyGj6R7 — Video tutorials for V6 receiver can be found at VIDEO - 202U V6 video tutorials Manual for V5 version: http://docdro.id/eY12WkA — Video tutorials for V5 receiver can be found at VIDEO - 202U V5 video tutorials. Manual for V4 and previous versions: http://docdro.id/QKlTjwr https://www.scribd.com/document/189111458/Solidremote-SR-RCS-202U-2-Channel-RF-Receiver-Instruction…

Thanks.

[Claichebob]

Thanks, All works fine now.
I tried aqll but what you suggested. I have been using the V3 for years and it is mkuch simpler!
Bob