How to wire 202U to work with a led strip

Wireless Receiver Kits
#1

Hello
can you show an example of how to wire a led strip to the 202u receiver? Not able figure out
Thanks

#2

Sure, please see this topic for details Need simple instuctions to use 202U to turn light on/off

And let me know in this thread (your own one) if you still have questions.

Thanks.

#3

Hi,
Wanted to thank you for the great help with the picture. I have my led working but have another issue that I need assistance.
I have a SPST 4-Pole relay that I want to control led strip and my robot drive system. So when I press A on your remote it can power on and off the lights but not the drive system. When I press the B button I want to turn the drive off and on but not power the leds connected to A. Currently I can wire the led and drive to the relay but not able to determine the correct wiring to control each independently. So currently i’m using 2 separate SPST relays, one to control the lights and the other to control the drive. I would like some help with a diagram to just only use one SPST relay if possible.
Thanks !!!

#4

Hello,

It seems one SPST relay can only control one target independently? so you may have to use two SPST relays.

If the led current rating is not high (<10amps @12vdc), then you can use our onboard relay to control led strip?

Thanks and let me know.

#5