202U to work with Switch

[krypt951]

I have a 202U that is being used with a wall mount gun cabinet. The gun cabinet has 2 functions, A. opens latch to allow access to the cabinet and B turns on/off LED lights. I want to make it so that the led lights are controlled by a wall switch and not the remote. Basically when the light switch it turned on it gives power to the outlet that the 202U is plugged into thus turning on the lights automatically. I would then be able to unlatch with the remote if needed. Once power was cut off from switch nothing would work.

[william]

Basically when the light switch it turned on it gives power to the outlet that the 202U is plugged into thus turning on the lights automatically.

So you can wire the lights to 202u either relay’s NC COM terminals, so when power on, the light will turn on.

I would then be able to unlatch with the remote if needed.

Use another relay to control the cabinet latch.

Thanks.